Home > FAQ > Content

Instruction for the Quartz Countertops Installation

Jun 08, 2018
  1. Notes before Quartz Countertops installation

    1.1 Check the model, size, installation location and other related information countertop

    1.2 Check the base course of the location for installation (such as flatness and size etc.)

    1.3 Check whether the adhesive is suitable for countertop installation

  2. During installation

    2.1 When installing, the glue special for artificial stones (adhesive) should be applied and blended in strict accordance with the instructor.

    2.2 When the base course is steel skeleton

    ① Place the adhesive in volumn of 50*50*10mm with interval of 200mm on the steel skeleton

    ② Place the countertop on steel skeleton, softly knead and press and use the spirit level to adjust the ocuntertop. The countertop should be adjusted to be level and in position correctly before the adhesive gets dry and hard.

    ③ When the countertop needs to be joinedm the joint backside should be equipped with reinforced ribs.


    2.3 When the base course is cement mortar

    ① The bonding materials should be the adhesives for artificial stones

    ② After blending of adhesive, pour enough adhesive on base course and use the serrated knife of 10*10 to scrape the adhesive to be flat and even.

    ③ Place the countertop on base course, softly knead and press and use the spirit level to adjust the countertop. The countertop should be adjusted to be level and in position correctly before the adhesive gets dry and hard.

    2.4 Clean the redundant auxiliary materials and use the wet towel to wipe up the countertop.

    2.5 Inject the glass cement to the joint between artificial stones and wall to close up.